home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Fritz: All Fritz
/
All Fritz.zip
/
All Fritz
/
FILES
/
EDUCMISC
/
CREAT1.LZH
/
README.1ST
< prev
next >
Wrap
Text File
|
1989-10-12
|
2KB
|
51 lines
"CREATIVITY PACKAGE" - IMPORTANT INFORMATION
The "Creativity package" consists of three disks. Disk #1 contains Thomas
A. Easton's book, "Think Thunder! And Unleash Your Creativity". Disk #2
contains the program THUNDER THOUGHT, and disk #3 contains the program
VERSIFIER.
BEFORE YOU START: Please make backup copies of all three disks. Put the
original disks in a safe place and use the backups for your work. See the
DISKCOPY command in your DOS manual.
HARD DISK USERS: You can copy all the files from the three disks to your
hard disk (perhaps into a directory named THUNDER). Instructions which refer
to different disks and the A> prompt can also be run from your hard disk at
the C> prompt.
FLOPPY DISK USERS: The instructions given assume that you have started up
your computer and that you will place the disk to be used in the A drive.
TO READ THE BOOK: Use disk #1. Type "READIT" and press <ENTER>. The book,
"Think Thunder! And Unleash Your Creativity" will be displayed in screen,
one section at a time. Instructions for the program, THUNDER THOUGHT, are
in Chapter 1. You can use the <PgDn> and <PgUp> keys or the up and down
arrow keys to scroll through the text. When you have finished reading a
chapter, press the <ESC> key to go on to the next chapter. At this point
you will see a message informing you that you can press <CTRL><C> if you
want to stop reading. To read only one chapter, enter the command "THINK1"
(Instead of "1" use the number of whichever chapter you wish to read.)
Use the <ESC> key to exit the chapter.
Note that the instructions for each program are also on the disk with the
program: THUNDER.DOC on disk #2, and VERSE.DOC on disk #3.
TO PRINT THE BOOK: Use disk #1. Follow the instructions to READ the book.
When a chapter appears on screen, press <ALT><H> to print it.
TO USE THUNDER THOUGHT: Use disk #2. Enter the command "THUNDER". Follow
the instructions as outlined in Chapter 1. (The instructions also appear on
disk in a file called THUNDER.DOC.) You can also get help while
running the progrm by pressing the <F1> key.
TO USE VERSIFIER: Use disk #3. Enter the command "VERSE". Instructions are
on disk in the file called VERSE.DOC.
Thank you for becoming a registered user of this product! We support our
users. If you have a question, comment, complaint or compliment, please
write to us.
Have fun!